Renlon surveyor inspecting a basement fitted with a cavity drain membrane

Waterproofing design support for project teams

Send us your drawings and we’ll design the below-ground waterproofing to BS 8102:2022, take design responsibility with £10m PI cover, and install it with our own teams.

Clients and manufacturers

Clients

WatesRichardsons NyewoodRichardsons NyewoodMorgan Sindall ConstructionKierFaithdeanRED Construction GroupJRL GroupKnight HarwoodErithWatesRichardsons NyewoodRichardsons NyewoodMorgan Sindall ConstructionKierFaithdeanRED Construction GroupJRL GroupKnight HarwoodErithWatesRichardsons NyewoodRichardsons NyewoodMorgan Sindall ConstructionKierFaithdeanRED Construction GroupJRL GroupKnight HarwoodErithWatesRichardsons NyewoodRichardsons NyewoodMorgan Sindall ConstructionKierFaithdeanRED Construction GroupJRL GroupKnight HarwoodErith

Approved by manufacturers

MAPEIDelta Membrane SystemsKÖSTERSikaWykamolMAPEIDelta Membrane SystemsKÖSTERSikaWykamolMAPEIDelta Membrane SystemsKÖSTERSikaWykamolMAPEIDelta Membrane SystemsKÖSTERSikaWykamol
What we solve

Where it goes wrong, and how we fix it

Get the waterproofing decided on the drawings, by the people who will install and guarantee it.

  • Waterproofing decided on site, not on the drawings

    Technical input from the outset, so decisions are made at design stage.
  • Unclear who carries design responsibility

    We take specialist design responsibility, with £10m PI cover.
  • Specifying a system without the technical data

    RenStrength™ technical information and data sheets C1–C4.
  • Keeping decisions in line with standards and insurers

    Help aligning decisions with BS 8102:2022, insurer requirements and Building Safety Act obligations.
  • Send Drawings for a Spec
Design responsibility

Why it matters who carries the waterproofing design

When NHBC reviewed its own warranty claims, basement claims since 2005 had cost nearly £21 million, across 890 homes.

BS 8102:2022 expects a waterproofing specialist in the design team early, so the details are settled on the drawings and not on site. When we design the system we take specialist design responsibility for it, backed by £10 million professional indemnity insurance, and our own teams install it.

Source: NHBC basement claims analysis, reported by The Construction Index, March 2014.

paid out on basement claims since 2005, by NHBC’s own count
Nearly £21m
affected by those claims
890 homes
our professional indemnity cover as specialist waterproofing designer
£10m
Services

What we do for architects

RenStrength™ · Type A waterproofing system

A Type A system for failed basements

Over 7 bar water resistance, about 12 mm, Euroclass A1/A2, EN 1504-3 (R2) and EN 1504-9. Five variations, selected by our surveyors for the substrate.

C1
C1 · Active water stopStops persistent leaks, even under pressure.
Testimonials

What our clients say

4.5 from 43 Google reviews

Chris Burbridge

Delta Membrane Systems

“Stand out from the crowd”

When it comes to structural waterproofing there are loads of commentators that talk a good game, but Renlon stand out from the crowd with their dedication and superior waterproofing strategies. Their surveyors offer knowledge and expertise throughout a project, ensuring compliance with BS 8102.

David Nott

Wates Construction

“No further ingress”

We found the Renlon team to be helpful and the operatives were diligent in ensuring that their installation was carried out to the highest standards to ensure that no further ingress ensued. I would have no hesitation in using Renlon again.

John Connor

Richardsons (Nyewood) Limited

“Delivered on complex programmes”

We recommend Renlon as they are a long-established company with a proven track record. Their surveyors and site operatives consistently deliver to the highest standards on complex programmes.

John J.

Basement crack repairs, West London

“Highly professional and well organised”

We found them to be highly professional and well organised. The process from enquiry through survey, estimate and ultimate delivery of the repairs worked extremely smoothly.

Simon G.

Damp proof course, Brixton

“A great job, highly recommended”

Very helpful engineers on site, who did a great job at explaining exactly the course of action they were taking. Highly recommended.

How it works

We design it. We install it. We guarantee it.

Four steps, one team, from the first conversation to the guarantee.

01

Send the drawings

Share the drawings and project brief with our surveyors.

02

Design to BS 8102:2022

We design the Type A, Type C or combined protection the risk calls for.

03

Install with our own teams

The people who designed it install it, so nothing is lost in translation.

04

Handover and guarantee

Qualifying works are handed over with Renlon’s 10-year guarantee.

Who we help

Not you? See how we help

  • Architects, Engineers & Surveyors
    • BS 8102:2022 waterproofing design
    • Specialist design responsibility, £10m PI
    • RenStrength™ technical data
    • CSSW and CSRT qualified surveyors
    Send Drawings for a Spec